Not Sure What You’re Looking For?

2019 Land Pride RCF3096 Pull-Type

Call for Price

Land Pride
RCF3096 Pull-Type



Performance in a Medium-Duty Cutter. The RCF30 Series is the perfect medium-duty cutter for pastures and roadside applications. Available in 3-Point, semi-mount or pull-type, the RCF30 features a 2-1/2" cutting capacity and 1/4" side skirts. Plus, every RCF30 comes with the rugged dependability that Land Pride Rotary Cutters are known for.

  • Surpassed rugged industry standards : All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • 540 or 1000 rpm: Fits wider variety of tractors.
  • High gearbox hp rating: Gearboxes are built rugged. See Specifications for actual Gearbox hp ratings.
  • 5 Yr. limited gearbox warranty: Shows our confidence in the gearbox integrity
  • 3 Gearboxes: Allows equal torque to be spread to left and right gearbox.
  • Splined rubber flex-couplers between the center and outboard gearboxes: Protects the driveline and gearboxes from hard objects in the blade path.
  • Pull-Type constant velocity driveline Option: Constant velocity driveline reduces chatter and extends life of U-joint during turns.
  • Slip-clutch protection on main driveline: Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
  • 8'- Cat. 1 & 2 or 10'- Cat. 2 & 3 3-point & semi-mount hitches or pull-type hitch: Fits a wide range of tractors. Semi-Mount and Pull-Type fit older tractors without a top link and smaller tractors without enough lift capacity
  • 10 Gauge deck, fully welded: Fully welded deck adds rigidity.
  • 1/4" Thick sidewalls: Protects sidewalls from thrown objects
  • Round back design: Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
  • Pull-Type w/dual leveling rods: Dual leveling rods eliminate deck twisting when going over uneven terrain
  • Chain or rubber guard option: Reduces flying debris.
  • Full length skids with replaceable shoes: Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
  • Splined blade hub: Splined blade hub offers tight non-slipping attachment to output shaft.
  • 3/16" Round stump jumper: Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft
  • 1" x 4" Blade bar: Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
  • 1/2" x 4" Heat-treated blades: Heat-treated blades last longer than non-heat-treated blades.
  • 2 1/2" Diameter cutting capacity: Aids in cutting brush.
  • High blade tip speed: Means cleaner cutting. See Specifications for actual blade tip speeds
  • Laminated tires: Laminated tires can handle almost any condition and don’t go flat.
  • Quick Hitch adaptable: 3-Point and semi-mount are Quick Hitch adaptable.
  • Model: RCF3096 Pull-Type
  • Machine weight with front & rear rubber guards. Includes hydraulic cylinder & 21" wheels with semi-mount and pull type units: 1,976 lbs
  • Hitch: with dual self level rods
  • Pull type tongue weight: 893 lbs
  • Park jack: Parking jack attaches to the tongue of the pull type cutter
  • Cutting width: 8' - 0"
  • Overall width: 8' - 7"
  • Overall length: 12' - 5"
  • Deck height: 11 1/4
  • Cutting height: 2" - 12" (5.1 cm - 30.5 cm)
  • Cutting capacity: 2 1/2"
  • Tractor Hp rating: 40 - 110
  • Gearbox horsepower rating: T-box - 160 hp, outboard 110 hp
  • Gearbox: 540 rpm or 1000 rpm driven gearbox. Cast iron housing, beveled gears
  • Gearbox input / output shaft size: Input shaft = 1 3/4" - 20 spline Output shaft = 2" dia
  • Gearbox lubrication: 80-90w EP gear lube
  • Gearbox oil capacity, end boxes: Comer = 6 pints
  • Gearbox oil capacity, T-box: Comer = 4.5 pints
  • Deck material thickness: 10 gauge (3.4 mm)
  • Deck side skirt thickness: 1/4" (6 mm)
  • Skids: Replaceable
  • Stump jumper: 2 ea. - 3/16" (5 mm) Round pan
  • Blades (4): 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated Free-swinging suction blades
  • Blade bolts: Keyed with harden flat washer and locknut
  • Blade tip speed: 16,360 fpm
  • Driveline : ASE Cat. 4 equal angle shaft or constant velocity u-joint
  • Driveline protection: 4 plate slip clutch Rubber flex coupler to wing boxes
  • Tailwheel options - pull-type w/single spindle: 2 tires: 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft
  • Tailwheel options - pull-type w/dual spindles: 4 tires: 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft
  • Wheel bearings: Tapered roller bearing in cast iron hub
  • Shock absorption: Spring shock absorber on axle of semi-mount & pull type
  • Front guard: Optional: Rubber deflector, single chain guard, or double chain guard
  • Rear guard: Optional: Rubber deflector, single chain guard, or double chain guard



Working Width
8 ft.
8 ft. 7 in.
12 ft. 5 in.
1,976 lb.
Recommended HP
40-110 hp

Related Products